Vertical Cooling Tank 1000 LT

All of our products are manufactured entirely from grade 304 stainless steel. The inner vessel is made of 2 mm CrNi sheet, the roll-bond (i.e. the refrigerant circulation area of the cooling system) of 1.20 mm CrNi sheet, and the insulation sheet, which we call the outer wall, of 1.20 mm or 1.5 mm CrNi sheet. With 4 load cells mounted on the legs of the tank, the amount of milk added to the tank can be shown on a digital display in litres or kilograms, as preferred. The temperature of the product in the tank is shown on a digital thermostat on the control panel, and the start and stop values of the cooling compressor can be adjusted by entering the desired temperature as the set value.

The gear reducer mounted on the tank stirs the product regularly during and after cooling. With this process, which we call the smart agitator, the agitator motor runs continuously during cooling to prevent the product from freezing; once the product reaches the desired (set) temperature, the cooling compressor stops and the agitator runs automatically at intervals to prevent the product from spoiling.

The agitator, fitted on the tank lid, is stopped automatically by a switch mounted on the body when the lid is opened and restarts when the lid is closed. Cooling is carried out by what we call the roll-bond system. Within the roll-bond system, the refrigerant gas is circulated only in the bottom of vertical tanks and only in the main body of horizontal products, and channels are laid out so that no area is left uncovered, cooling only those areas. Copeland, French and Danfoss brand compressors are used as cooling motors. 404 refrigerant gas is generally used in the cooling system. Apart from the digital thermostat, the electrical panel consists entirely of Schneider circuit breakers, contactors and thermal relays. For ease of use, it is operated with only three buttons.

These are labelled cooling, agitator and pump. The insulation is polyurethane. A fully opening lid is used to make tank cleaning easier. The lids are supported by springs so that they do not cause any problems in the future. A wave breaker placed inside the tank with the opening lid prevents the milk from foaming and losing quality. Suitable cooling motors are selected according to capacity.A 1 hp cooling motor is used for 300 kg, 1.5 hp for 500 kg and 3 hp for 1000 kg, and these three products are manufactured vertically. It has a fully opening lid.

Our tanks can operate on 380 or 220 V. Our products come with a 2-year warranty.